6 Ways to Fix PAGE_FAULT_IN_NONPAGED_AREA in Windows 10 [2024]

0

6 Ways to Fix PAGE_FAULT_IN_NONPAGED_AREA in Windows 10 – Most critical errors in Windows 10 are the result of software faults or malfunctioning drivers. However, Page Fault in Nonpaged areas is usually caused by a hardware problem, especially RAM. The error can also be associated with Windows virtual memory management errors.

6 Ways to Fix PAGE_FAULT_IN_NONPAGED_AREA in Windows 10
6 Ways to Fix PAGE_FAULT_IN_NONPAGED_AREA in Windows 10

How to Fix PAGE_FAULT_IN_NONPAGED_AREA in Windows 10 [2024]

To eliminate them, users must diagnose hardware and software faults. Here are six ways to solve the PAGE_FAULT_IN_NONPAGED_AREA blue screen of death.

Read more:

#1. Check the RAM

If you’ve made any recent hardware changes to your computer, it’s a good idea to check if everything is installed properly.

Sometimes, the new RAM can be damaged, or even the old one can be damaged. Here are some things you can do to check RAM. Remember to turn off the computer and disconnect all cables before continuing.

Check RAM
Check RAM
  1. If you are using two RAM sticks, try changing the slots.
  2. If you are using a single RAM chip, clean any dust that may have accumulated.
  3. If you have some spare RAM modules, try changing the RAM and rebooting the PC. If the error does not appear, it means that the RAM you used previously was damaged.
  4. Try using only one RAM slot.

#2. Update Or Roll Back the Driver

Wrong drivers can damage your computer. That’s why you should always update your drivers to the latest versions. But sometimes these updates may be unstable, which can damage your computer. In such cases, it is best to roll back to the previous version.

How to Update Drivers Using Device Manager

Device Manager is by far the most effective way to keep your system drivers updated.

In case of Page Fault in Nonpaged Area BSOD, usually, the graphics driver or chipset is at fault. Graphics drivers are found under  Display adapters in Device Manager, and chipset drivers are under System Devices. Here’s how to update drivers using the device manager:

How to Update Drivers Using Device Manager
How to Update Drivers Using Device Manager
  1. Press the Windows key + R  to open the Run dialog box. Type devmgmt.msc and press Enter.
  2. In the Device Manager window, locate the driver you want to update and expand the menu.
  3. Then right-click on the required driver and click Update driver.
  4. In the next window, click  Search automatically for updated driver software.
  5. Windows will automatically download and install the latest drivers.

How to Roll Back Driver Using Device Manager

As previously mentioned, there are instances when the new driver may be unstable. Here are the steps to roll back drivers using Device Manager:

How to Roll Back Driver Using Device Manager
How to Roll Back Driver Using Device Manager
  1. Press the Windows key + R  to run the Run command. Type devmgmt.msc and press Enter.
  2. In  Device Manager, expand the section containing drivers. Right-click on the desired driver and select  Properties.
  3. Under the Driver tab, click  Roll Back Driver.

#3. Disable Automatically Manage Paging File Size

This method has a high success rate of fixing PAGE_FAULT_IN_NONPAGED_AREA because it is directly related to virtual memory. Windows normally manages the size of the paging file, but if it’s causing your system to crash, it’s best to disable it:

Disable Automatically Manage Paging File Size
Disable Automatically Manage Paging File Size
  1. Open  File Explorer and right-click on This PC. Select  Properties.
  2. In the left pane, click on  Advanced system settings. You need administrator rights to do this.
  3. In   System Properties, click on the Advanced tab. Under the Performance section, click  Settings.
  4. In the Performance Options window, navigate to the Advanced tab.
  5. In the Virtual Memory section, click  Change.
  6. Uncheck the Automatically manage paging file size for all drives option and click OK.
  7. Apply all settings and reboot your computer.

If the PC is working fine after a reboot, leave the settings as they are, but if the error persists, it is recommended to revert the changes and check the Automatically manage paging file size for all drives option.

#4. Run Windows Memory Diagnostic Tool

Windows Memory Diagnostic is a built-in Windows utility that checks and fixes problems with RAM. Easy to use and very effective. This is how you use it.

Run Windows Memory Diagnostic Tool
Run Windows Memory Diagnostic Tool
  1. In the Start menu search bar, type “Windows Memory Diagnostic” and select the most appropriate one.
  2. You can choose to  Restart now and check for problems or do it the next time you turn on the computer. You are advised to choose the first option.

#5. Use DISM And SFC To Repair Corrupt System Files

DISM and SFC are two of the most effective utilities for repairing system files. Since there is a possibility that an error system file is the cause of the problem, it is recommended that you use these two utilities.

How to Run DISM

Use DISM And SFC To Repair Corrupt System Files
Use DISM And SFC To Repair Corrupt System Files
  1. In the Start menu search bar, type cmd and right-click on  Command Prompt > Run as administrator.
  2. In the console, type  DISM /Online /Cleanup-Image /CheckHealth and press Enter.
  3. Then type  DISM /Online /Cleanup-Image /restore health and press Enter.
  4. Wait for the process to complete and exit Command Prompt.

How to Run SFC

How to Run SFC
How to Run SFC
  1. Follow step 1 in the previous section to run  Command Prompt as administrator.
  2. In the console, type   SFC /scannow and press Enter.
  3. Wait for Windows to scan and fix errors.
  4. Restart your computer.

#6. Disable Third-Party Software

Often, third-party software interferes with system functionality and can cause blue screen errors such as PAGE_FAULT_IN_NONPAGED_AREA. In this case, the user must perform a clean boot to rule out third-party applications as the cause of this error. To do this, follow the steps below:

Disable Third-Party Software
Disable Third-Party Software
  1. Press the Windows key + R to open the Run command. Type msconfig and press Enter.
  2. In the System Configuration window, go to the Services tab.
  3. Check the option Hide all Microsoft services located at the bottom.
  4. Check all services from the list in the middle, and click  Disable All.
  5. Save and exit.
  6. Now, open  Task Manager. You can do this by pressing  CTRL + Shift + ESC.
  7. Under the Startup tab, click each program and then click  Disable.
  8. Exit and reboot your computer.

If the error is resolved, it means a third-party app is causing the problem. You will have to uninstall any recently installed apps to prevent this from happening again.

Read more:

Conclusion:

So those are some ways to solve PAGE_FAULT_IN_NONPAGED_AREA. The above-mentioned fix is ​​an easy way to solve PAGE_FAULT_IN_NONPAGED_AREA BSOD. If you have faulty hardware, double-check if it is compatible with your PC.

Don’t forget to bookmark and always visit every day Technowizah.com because you can find here the latest Tech Computer Android games How-to Guide Tips&Tricks Software Review etc, Which we update every day.

Previous article8 Ways To Fix Application Error 0xc00007b in Windows 2024
Next article7 Ways to fix Unspecified Error 0x80004005 In Windows 10 [2024]
Akshara Singh
I'm Akshara Singh, from Tamil Nadu (India) I have been Running this Blog since 2016 with my full effort to Help users in the Tech field and clear doubt, and provide advanced guides in simple methods.

LEAVE A REPLY

Please enter your comment!
Please enter your name here